* shields give you 1000 points
* redundant shields don't make you puase
* checkpoints give you 2000 points
* falling down a deathpit is just falling, not bouncing
Treating " as whitespace in TEXTURES (and animdefs too i guess)
SLADE adds this character in its TEXTURES editor and makes SRB2 cry unless the lump is manually edited; this just treats it as whitespace so we don't have to think too hard about it.
Also, two I_Errors now refer to the correct lump name.
See merge request !122
Proper barrel sky distortion
Skies now use proper barrel distortion in both axes, rather than just the x-axis (i.e. just horizontally) as in all previous SRB2 versions. Credit goes to Nev3r for the original change and idea.
Was going to make an option for a non-barrel distorted sky, assuming barrel distortion is the default, but I just can't quite get it to work in a way that is pleasing to the eyes. So I've not bothered with it here for now, unless someone objects to barrel distorted skies for any reason?
See merge request !35
FOF wall slope skewing
FOF walls now can optionally skew with respect to slopes (software mode only currently):
* Upper Unpegged on the CONTROL linedef enables wall skewing
* Lower Unpegged on the IN-LEVEL linedefs ^1 determine which slope to skew with respect to (off = top slope, on = bottom slope)
* If Transfer Line is used however, Lower Unpegged on the control sector's linedefs does the above's job instead
^1 (this is because they already control pegging of individual FOF walls as it is, so this is for convenience and my sanity that they also deal with skewing)
See merge request !39
Fixes to horizontal spring collision
Fixed various issues arising from collision with exclusively horizontal springs. Thamks to @Inuyasha for the heads up! Of note:
* If you hold down your jump button whilst jumping into it, you no longer immediately use your ability.
* Characters with (CA_DOUBLEJUMP && CA2_MULTIABILITY) or CA_FLOAT or CA_HOVER no longer lose track of their jump count.
Also:
* Upped the strength of info.c's red and yellow horizontal springs.
See merge request !41
Horizon lines
Horizon lines for software mode! Place a Linedef type 41 somewhere on a one-sided linedef and it'll do fancy rendering hacks to draw the adjacent floor/ceiling to the "horizon". One small thing to sort out when I remember to do so, but this is good enough for merge already.
See merge request !44
FF_ANIMATE additions: globally synced animations
FF_GLOBALANIM = makes the animation synced to the level's timer, so all objects will display the same frame at the same time
I mean, doesn't that look so much prettier?
There's also some changes to FF_MIDDLESTARTCHANCE (FF_ANIMATE behavior was split due to not acting consistent between that and SPR2 behavior).
See merge request !46
* Object number up/down is now assigned to ringslinger weapon next/prev. SO much nicer to use, especially since most people have that stuff bound to the scroll wheel.
* introducing the new friend, SH_FORCEHP (which is used as a bitmask to get the extra hitpoints of a force-shield user)
* P_DamageMobj now considers the unimplemented shield constants as well as the implemented ones.
* When not pressing any direction, you now go backwards by default - to emphasise that this is primarily for defensive, not offensive, purposes.
* The camera can now handle the player going backwards without them going completely off-screen.
* Fixed some overzealous checks.
* The spinfire ring is now capable of damaging enemies. (god, what a terrible hack this is)
* When ground pounding, you now bounce off the floor a little bit to make the ability less spammable.
* The Dodge Dash
* Allows you to dash - no control, no falling, no key response - for 2 + (number of extra shield hitpoints) tics.
* If you're holding movement keys down, you dash in the direction you're holding - otherwise, you dash directly forward.
* You're spinning (spindash spin, not jump spin) until your dash is over, then your momentum is cut down significantly and you end up in falling frames.
* It may not necessarily be super useful for Sonic, but it helps the other characters.
* http://gfycat.com/BogusFailingFritillarybutterfly
* http://gfycat.com/PoliticalIdealisticBallpython (outdated speed, shows any direction)
Animated sky support
What it says on the tin: skies can be animated textures now. Just set them up as normal animated textures (keeping in mind the starting texture still has to comply with the SKYn/SKYnn/SKYnnn naming format) and hey presto, your sky animates.
See merge request !34
* If you hold down your jump button whilst jumping into it, you no longer immediately use your ability.
* Characters with CA_DOUBLEJUMP and CA2_MULTIABILITY no longer lose track of their jump count.
(the problem was that MT_OVERLAY's default radius and height were never getting changed from 1*FRACUNIT, and that meant that when you spindashed, the game considered it completely below the surface of the flat you were standing on. Since you're not usually clipped on flats that don't belong to FOFs, we didn't notice this issue sooner.)
* Camerascale, shieldscale, height and spinheight are now player attributes which are set to the skin attribute on skin change, not read directly from the skin.
* P_GetPlayerHeight and P_GetPlayerSpinHeight are now macros instead of functions.
* Extra protection against switching to a locked skin.
* flips the sprite ala MFE_VERTICALFLIP except you don't need to flip the direction of gravity for the object just to draw upside down
* stacks properly with reverse gravity
HOWEVER, since these changes to PIT_CheckThing do raise questions about whether there may be unintended side effects here. As a result, I may remake this for internal only if necessary.
* Sets the sortscale of the mobj to that of its tracer.
* Basically, Smiles' tails won't clip through shields thanks to this.
* http://gfycat.com/GraveGlassEwe
* Also has support for chains of MF2_LINKDRAW!
More slope fixes (aka sorry guys I made another quick SUGOI fix)
Another slopes fix branch!
This branch currently includes a fix for:
* Knuckles gliding into a slope while in 2D mode causes him to try to "climb" on air above them, if the original non-sloped height is higher. Unfortunately he still tries to grab onto places that he can't really climb on, but at least now it's on the slope itself and not in mid-air lol. This issue is encountered in SUGOI's Retro Hill Zone, if you want to check for yourselves.
* Bustable FOF-busting code for both players AND pushables not accounting for slopes
* (Unrelated to slopes): Fix FF_SHATTERBOTTOM FOFs acting like THZ goop when stood on; I added this fix as a bonus because I encountered it in a test map of mine for the bustables fix
(Other fixes may or may not appear here in the near future, I haven't decided yet. Don't wait on me to get in any further fixes before merging, that said)
See merge request !110
Last-minute NiGHTS exiting bugfix
One single-line fix concerning the end of NiGHTS maps. Extremely small, literally zero side effects here, the only reason I'm not committing directly to master (aside from ettiquette) is that I don't have the ability to do so.
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2). This is no longer the case.
See merge request !100
Also, the particles made via spindashing in shallow water are now located behind the player. This does move the running particles too, but that's okay.
* Fixed bug where being pushed off a platform whilst charging a spindash would leave you in your charging frames instead of your rolling ones when you hit the ground (http://gfycat.com/MassiveThreadbareItalianbrownbear for how it works now, http://gfycat.com/MarvelousEnlightenedAuk is how it used to work)
* Fixed bug where spindashing on top of a bubble spawnpoint led to you being able to move around in spindash frames (no gif since obvious desired behaviour is obvious)
* Spindash animation speeds up the faster you'll shoot off.
* The spin charging mechanism is now scale-independent, and only multiplies by scale when shooting off - less FixedMul calls, and potentially deals with weird quirks of changing scale whilst spindashing that nobody's discovered because there's no place to find that in the main game!
Also:
* Climbing animation defaults to rolling instead of walking, because what.
Skewing direction is decided per in-level wall by the Lower Unpegged flag on in-level linedefs themselves, since they already decide the stuff for FOF wall pegging as it is. That is unless Transfer Line is involved which moves everything to the control sector linedefs instead...
Cutscene switch fix
Yet another fix for SUGOI, lol: apparently going from a final level's post-cutscene straight to a custom credits cutscene gets the latter stuck forever in the first scene (because the game accidentally stops the cutscene responder from realising the custom credits cutscene is running). This branch of course makes a fix for that.
See merge request !108
Wall collision fixes
Fixes included in this branch:
* A fix for a specific crash encountered in a SUGOI map (sound familiar?) caused by bouncing off a wall adjacent to a slope
* A fix for solid midtextures not accounting for Effect 3/Peg Midtexture properly (https://mb.srb2.org/showthread.php?t=41462)
* A fix for solid midtextures not accounting for texture y offsets properly for non-Lower Unpegged/Peg Midtextured midtextures
* A fix for solid midtextures not accounting for "infinite" repeats (Repeat Midtexture + no repeat count set)
* ~~A fix for Effect 4 on Polyobject First Line making that particular linedef's midtexture solid in addition to making planes visible - this is not wanted if you want a polyobject with both visible planes and full intangibility.~~ Apparently they never did this anyway, don't mind me \o/
See merge request !104
Fix non-player objects having busted step-up/down on slopes
Why the fuck did I make this a player conditional in the first place holy shit
See merge request !103
RA menu can be opened if the game is modified, but Start can't be selected. (Obvious reason: so scripts to display info can be used easier)
Fixed the stupid background for messages in the Record Attack menu, it was bugging me
Also, I added more sortscale handling in the places where I forgot it.
I probably need some help with the maths here to get this to work nicely. http://gfycat.com/LimpAgedDowitcher
http://i.imgur.com/UyOKX5u.png <-- this common glitch with crawlas given MF_PAPER (THEY'RE NOT GOOD AT TURNING NEAR EDGES) used to show the behind-crawlas in front of the front-crawlas.
Unfortunately, I've just discovered this issue (which happens with the old version of the sorting code too): http://i.imgur.com/QNjbATB.png but to be fair these crawlas have gotten stuck inside the edges of this platform, so I'm not sure I can do anything about this without cutting off Sonic's feet when he stands on the ground? shrug
* MF_AMBUSH is now MF2_AMBUSH, because it's something you turn on in a map editor, not with a SOC definition.
* Where MF_AMBUSH was is now MF_PAPER.
* MF_PAPER accesses all the stuff I did previously in this branch...
* ...as well as turn on paper-thin collision detection between mobjs, which I've gotten working but isn't perfect but it's still good enough for non-solid objects!!
* recognising that the offsets weren't going to be accurate if you just SWAPPED yscale and yscale2 over 180 degrees
* taking scale into account consistently
also, some optimisations
also, i've sussed out WHAT'S going wrong here - the topleft pixel of the sprite will always be rendered at the height on the screen it would be rendered otherwise, which is causing the waving. now to figure out what to change to get that to move appropriately...
some complicated mathemagic leads to something which... seems CLOSE, but not perfectly accurate, so i think i need to tweak it more
http://gfycat.com/JovialSpitefulAmericancrayfish for current behaviour
I DID make some steps towards re-implementing PIT_CheckThing for solids only in order to replace the hack long-term and hopefully use less CPU, but is currently disabled via #if 0 since I'm not comfortable changing the function signature of P_CheckPosition right now.
If there's any reason to bring the old system back we could make it togglable by one of the linedef flags I suppose. Not that many people would actually use it though, most likely
remove all the places where i've set vis->scalestep to anything other than 0 to see something that LOOKS okay, but doesn't fulfil exactly what i want (that being a sprite that looks exactly like a midtexture)
* Effect 3 (Peg Midtexture) is now accounted for properly, flipping the collision box position to match the actual rendered position of the midtexture
* Fixed incorrect application of y-offsets for non-lower unpegged midtextures collision boxes; +ve always goes up, -ve always goes down!
* Effect 4 now doesn't make midtextures solid for polyobjects at all - this "conflicted" with First Line having both Effect 4 (visible planes) and Effect 3 (intangible) simultaneously, where we kind of expect the first line's wall to not be made solid. This may be less of a problem in future SRB2 versions, but for now solid midtextures for polyobjects are disabled.
. tmthing can be NULL if called from PTR_SlideTraverse, so we should use slidemo instead
This fixes a crash that occurs in yet ANOTHER SUGOI map, involving bouncy walls next to sloped floors/ceilings
To understand: look at AjustSegs(void) in hw_bsp.c. It reallocates the vetex_t pointers for lines as POLYVERTEX_T pointers, and of COURSE things are gonna get wacky when you're casting pointers.
I dunno how resilient the FLOAT_TO_FIXED solution is or whether it'll be netgame compatible (yayyy float precision loss) but it's not like our builds are netgame compatible with themselves
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2).
* When completing a NiGHTS stage with a non-zero link, the link could flash up in the final few tics before the fade to black. This just checks for player->exiting to make sure it shouldn't be shown.
* That hacky anti-NiGHTS-deaxisment code I commented out because I thought it was visual only? Reimplemented in a way that is both more and less hacky. It's identical in result to the original code, but takes a roundabout method to get there.
* Sprite references for SUPE, SUPZ and NDRL are removed because they are now unused.
* Helper's flashing conditional is restructured to do less flag swapping.
* The check for super setting FF_FULLBRIGHT is limited to MAXTRANSLATIONS now, and also correctly takes into account MAXSKINCOLORS == SKINCOLOR_SUPERSILVER1.
* NiGHTS collision bounds aren't hardcoded anymore.
* NiGHTS link will never display when leaving stage.
* Slightly tweaked rules for the supercolor setting when doing a NiGHTS transformation, but only meaningful for setting FF_FULLBRIGHT.
* if you can turn SF_SUPER, flash your skin's supercolor, otherwise be your normal color
* if your skin doesn't have a SPR2_NGT0 (horizontal fly), use Sonic's (this will hopefully be replaced by 2.2 with sprites of NiGHTS themselves)
* MT_NIGHTSCHAR made irrelevant, everything follows actor->target instead of actor->target->tracer now
* emerald is now player->mo->tracer instead of player->mo->tracer->target
* nightopian helpers flash for the 35 tics before they disappear
* nights capsule makes boss explosions/noises now (i can change it back i just like it better)
* drill off into the sky instead of fly up in floating pose (but no noise yet)
ALSO:
* default maxdash is now 70
* forgot to add supercolor to lua, it is there now
* SPR2_SMSL renamed to SPR2_SSTN (stun)
* any player with a skincolor that's in the super range is set to FF_FULLBRIGHT at state-set time, so no need to keep super players non-fullbright just because they use spin stuff
OpenGL planes fix
This branch removes a specific hack in the OpenGL code for detecting if a plane is for the floor or ceiling of a sector. This it turns out fixes ceiling slopes in Boinciel's SUGOI map going missing. Though, It doesn't fix that other glitch with one FOF (must be unrelated).
If you want to test these fixes out properly, make sure working in-level sectors, FOFs AND also polyobjects all still work fine, sloped or not.
See merge request !97
Fof slope crash fix
This fixes yet another software renderer crash, this time relating to sloped FOFs: sometimes the renderer thinks parts of FOFs where the top and bottom heights are the same height are actually the bottom going through the top (in other words a negative height). This causes problems when drawing normal walls around such FOFs since the game obviously doesn't expect negative heights anywhere along the FOF - before slopes, the game could just flip around the top and bottom heights automatically with no problems. This branch also should fix crashes for all genuine cases of negative FOF heights when slopes are involved, I suppose.
Hopefully this stops FuriousFox's SUGOI map crashing for the time being, all seemed fine when I tested it out myself.
See merge request !96
* Don't allow arbitrary numbers to be used for a skin's supercolor, only strings.
* Devmode is no fun allowed mode, so turn off the god hyper flash there.
* Several new supercolours.
- SKINCOLOR_SUPERSILVER1-5 (for fun) - "Silver"
- SKINCOLOR_SUPERPERIDOT1-5 (nyeheheh) - "Peridot"
- SKINCOLOR_SUPERCYAN1-5 (for fun) - "Cyan"
- SKINCOLOR_SUPERPURPLE1-5 (for fun) - "Purple"
- SKINCOLOR_SUPERRUST1-5 (mecha/metal sonic) - "Rust"
- SKINCOLOR_SUPERTAN1-5 (shadow/silver the hedgehog) - "Tan"
* SKINCOLOR_SUPER1-5 renamed to SKINCOLOR_SUPERGOLD1-5, one index for darkest is changed - "Gold"
* SKINCOLOR_TSUPER1-5 renamed to SKINCOLOR_SUPERORANGE1-5, ported properly to the new palette - "Orange"
* SKINCOLOR_KSUPER1-5 renamed to SKINCOLOR_SUPERRED1-5, ported properly to the new palette - "Red"
* new S_SKIN attribute - supercolor - uses an entirely different function to get the names (R_GetSuperColorByName instead of R_GetColorByName)
* a fun little secret - typing "god on" in the console whilst super makes the player hyper (visual only, no sparkles - just rainbow flash) - can be removed if no fun is allowed
-warp checking for invalid map names
I've noticed a bunch of new people getting the "Cannot warp to map 0 (out of range)" error when testing their custom maps. On asking what map name they used, it was clear they didn't use a MAPxx name at all. Sadly it was not obvious to them that other kind of map names are not accepted by SRB2, so I thought it best we make that more clear in-game.
SRB2 now gives you the error "Cannot warp to map \[your input\] (invalid map name)" if you used -warp with a param that is neither a MAPxx name or a plain number.
See merge request !99
Fix R_AddSingleSpriteDef's I_Error messages
Whoops, seems I forgot about this little branch. Basically this fixes how for a character's sprites, a full sprite lump name is displayed instead of just its sprite prefix in the "R_AddSingleSpriteDef: No patches found for [sprite prefix] frame [frame character]" message (unlike when it occurs for non-character sprites), resulting in something like "R_AddSingleSpriteDef: No patches found for PLAYC2C8 frame \^" which does NOT help custom character authors at all as it just confuses them instead. (for the record, the problem would actually with the ^ frame and not the ones displayed after "PLAY")
Oh, and the same problem is also fixed for this similar message: "R_AddSingleSpriteDef: Sprite [sprite prefix] frame [frame character] is missing rotations"
See merge request !95
Spr2 freeslots
Needed for Miles, generally a good idea to have around anyway. Considering Miles uses it without problems, seems to work fine.
See merge request !24
for some apparent reason the compiler didn't like the while loop condition edit on its own (it complained about inline failures for P_MobjReadyToTrigger for some reason), so I had to add that extra bit above the while loop... and it was happy again, huh
If you want more specifics, sloped FOFs are to blame it turns out: sometimes the bottom of an FOF wall blocking a segment of an in-level wall column can be considered ABOVE the top part of the FOF there (yikes), and then the dc_y* values go offscreen, and then BOOM
* Press spin in midair to make the shield flash solid repeatedly and make a number of ding noises.
* When the player with a flashing, dinging shield hits the ground, they are sent off in spinning form at the maximum of 2*abs(momz) VS the 3D hypotenuse of momx, momy, and momz.
Software crashes fix... fix
Fixes a typo introduced by merge request !75 that caused upper textures to set the wrong ceiling clipping value when not visible, allowing all sorts behind the walls to be visible. This is most noticable in GFZ2 when the inside of the tunnel section is visible
...probably a good idea to make sure this one doesn't introduce any MORE visual glitches by mistake (again, compare with 2.1.15 if possible)
See merge request !93
Fix for flats with transparent pixels on slopes
This fixes how R_DrawTiltedSplat_8 unintentionally allows the cyan pixels to NOT be considered "transparent" if after being remapped, depending on sector brightness and/or linedef type 606 colormaps, the result of remapping is not palette index 247 (the cyan we typically turn transparent). That is, the original colors from the source flat graphic are not checked, but instead the __result__ of coloring the flat under the respective colormap is checked for "transparent" pixels. This is only a problem for the tilted splat drawing function, not the regular one for non-sloped planes with cyan-pixel-using flats.
I found out about this bug from the issues Ritz was having with sloped 255-alpha translucent FOFs using transparent flats and his custom COLORMAP lump (and later when he applied a linedef type 606 colormap to the FOF) for his custom map. Thankfully he has some workarounds, but this should fix the code-side issues that caused his problems in the first place.
I also fixed stuff with another splat drawing function that's not currently used atm (maybe it will be in the future, if splats themselves are ever enabled again? *shrugs*).
See merge request !92
Skybox rendering offset fix for third person/alt view camera
Fixes the issue reported in this thread: https://mb.srb2.org/showthread.php?t=41729
I dunno if this will negatively affect any existing skyboxes in SRB2's own levels, that said. I tried out THZ2 and CEZ1 with this fix at least but I forgot to compare them with how they are in 2.1.15 so _*shrugs_*
See merge request !94
OS X Makefile build setup
This merge request:
* Cleans up the OS X bundle resource location code and fixes a SIGSEGV and memory leak
* Simplifies and fixes the OS X desktop alert code, closing more leaks
* Adds the MACOSX build flag to the Makefiles, to allow building a binary (but not Mac app yet) of SRB2.
This is intended to make it easier for developers to build on Mac OS X, without having to pull in all of XCode. You can keep using CMake if you prefer.
To test, use `make -C src MACOSX=1 NONX86=1 SDL=1 NOASM=1` for a release build.
Left to do:
* Add a content bundling script to be run after building, and a flag to trigger doing that.
`MACOSX_BUNDLE` maybe?
* Somehow get access to a Mac running PowerPC and figure out how to build a multi-platform binary.
* Add the proper magic to compile using gcc if requested. (Right now, compilation is done via LLVM/Clang)
See merge request !72
Gas jets, fan objects, springs and slopes
Whoop whoop whoop minor bugs that only get noticed due to weird experiments whoop whoop whoop
* For gas jets only: the object's standingslope is ALWAYS null. No drifting down the slope for you.
* For gas jets and fan objects: Now checks whether the player's top is below the bottom of the launcher, instead of its bottom. zdist calculation not affected, since it's signed and okay with being negative by about the height of the player.
* For all 3: the player's standingslope is NULL'd so the player isn't launched off at a wacky angle if they're standing on a slope then walk into the thing.
See merge request !91
Remove i_net.c
The code in i_net.c doesn't actually seem to be used in SRB2. I was able to compile a build without it, and hosting and joining netgames worked just fine (well, as fine as they can with the current state of the netcode...).
The vast majority of code in the file seems to be contained in HAVE_SDLNET ifdefs, and I'm pretty sure SRB2 has never used SDLNET in a public build. The only bit not contained in that block is I_InitNetwork(), which just prints an error and returns false.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
See merge request !73
Re-factoring AA tree code from m_misc.c/m_misc.h into its own files
What the title says. The AA tree-related code now lives in the files m_aatree.c and m_aatree.h. Part of why I did this was to solve this m_misc.h/w_wad.h cyclic dependency problem (involving MAX_WADPATH and AA trees themselves) mentioned in the now-removed comments, another reason was ...only OpenGL uses AA trees at all, why include the relevent structs/functions/otherwise anywhere except where is necessary (which is very few files as it turns out)?
Otherwise, it just looked better on its own rather than mixed with all the other stuff already in the m_misc files. Not really important or anything affecting gameplay at all I guess.
See merge request !82
* When moving slowly, P_InstaThrust at S_SKIN's maxdash forward, and set momz to S_SKIN's mindash upwards. Plays a tok noise (not thok). Hurts enemies/bosses, busts spikes/monitors/all types of bustable blocks.
* When moving quickly... doesn't do anything yet, but WILL do a slide.
Also, P_DoSpinDash is now renamed to P_DoSpinAbility, and CA_TWINSPIN users can bust all bustable blocks on collision too.
* CA_TWINSPIN - you can do it multiple times
* CA_DOUBLEJUMP - your jump height is reduced each time, like in Kirby games. The number of extra jumps once you've left the ground that are available is determined by the character's actionspd.
* Electric sparks coming off entire body instead of bubbles coming out mouth
* Different sounds.
* Different icons.
These sprites are currently local only, but I'll be doing a lot of asset updating this evening since Rob asked me to so it won't be long until you can get them.
Sideways springs, horizontal hog-launchers, perpendicular plungers...
Call them what you like, they're in the code now. And have been for months!
Nev3r uses the hell out of these and I'm fed up of them being <!>'s all over the place, so please have 'em in master so we can update srb2.srb and make things better for all of us.
See merge request !30
* FF_MIDDLESTARTCHANCE - has a 50% chance of starting the spr2 or FF_ANIMATE animation halfway in
* FF_SPR2ENDSTATE - if var1 == S_NULL, don't loop, just stop incrementing the frames. Otherwise, go to the state represented by var1.
The former is just something I did for fun, the latter is something that'll come in handy when porting in new-character-moves.
Setup:
* S_SKIN needs an "availability" line. Set to 0 to have always available, otherwise is assumed to be UINT8 unlockable number. If it's a valid unlockable, its name will be copied over with the character's realname.
* Define an unlockable via SOC or hardcode. If you don't want it visible on the Secrets menu, just set its type to None. Everything else is as normal - you can set the conditionset to whatever, objective, height, nochecklist, nocecho...
