* Speaking of, actively enforced not being able to be Super and NiGHTS at the same time.
* Also on that note - SPR2_TRNS is now the NiGHTS transformation. The Super transformation is (FF_SPR2SUPER|SPR2_TRNS).
* SPR2_NPAN is now SPR2_NSTN, since it matches Super Sonic's stun animation rather than the pain animation.
* Fixed a bunch of things where Super float was handled badly with 2AM brain.
* Fixed the R_ProjectSprite error going out of spr2names' bounds.
* Fixed order of FF's in dehackéd.
* Fixed that thing where Super Sonic was blue for 1 tic after transformation, and the life icon was a blue Super Sonic.
* Super sprites are now deliniated via an additional S_SUPER lump between S_START and S_END. Above are normal sprites, below are super sprites. Handled internally via FF_SPR2SUPER.
* Sprite2 numbers are now appropriately limited for the data type that stores them.
* SPR2_SPIN is now SPR2_ROLL, SPR2_DASH is now SPR2_SPIN and SPR2_PEEL is now SPR2_DASH. Makes more sense, right?
Making Metal's pinch cues suck less
Does what it says on the tin. Give it a shot with <root>/toaster/metaltest.wad to skip the race and go directly to the boss to see what it does!
See merge request !70
Add a vertical flip variant for the translucent column drawer.
Translucency is now properly distributed: 0.00 leads to no render at all, 0.1 to TRANS10, ..., 0.9 to TRANS90, 1 to regular column drawer.
Precipitation sprite overflow fix
This fixes artifacts of rain/snow sprites appearing on-screen in levels that have rain/snow, if said sprites were high enough above the camera. This kind of thing was previously fixed for sprites of regular objects (and textures of FOFs?), but apparently the fix wasn't applied to sprites for precipitation as it turns out.
I found this most easily reproducable in SRB2TD's Stormy Streets level, because some of the invisible FOFs make raindrops continually splash right up at the sky ceiling itself. Position your camera underneath them right and ...voila, ghostly precip sprites apparently appearing. (You'll need to make a SOC to make the level playable in vanilla SRB2 mind)
See merge request !169
(various large invisible blocks used in the level cause rain to make splashes high above the main level, high enough to make ghostly rain splash sprite artifacts appear sometimes in nearby areas)
Record attack custom exit fix
This fixes the bug reported here: http://mb.srb2.org/showthread.php?t=42342
Record Attack now no longer allows the tally to be skipped, whether by custom exits or by Lua etc.
See merge request !164
Dedicated console shift-down fix
This fixes the special console window used by dedicated mode not properly telling the game when shift is held down since the console improvements added in 2.1.17. This means shift+1 is properly interpreted as "!" again rather than 1, shift+- should be "_" rather than "-", etc.
Sorry LJSonic your problems from pre-2.1.17 are probably just your keyboard being for a different locale than the one most SRB2 players play with so I'm aware, I'm not sure what can be done for the time being. =V
Fun note, you can see how the game interprets un-executed input to the console window by playing normal (not dedicated) SRB2 with `-console`, which creates a second window for the console just like you'd see for dedicated mode. Drop down the console on the main SRB2 window, switch to the console window and type something in (DON'T PRESS ENTER), and you'll see the input appearing in the input space in the console window at the same time!
See merge request !163
TD render fix 2: Electric boogaloo
This fixes TD's terminal stage freezing the game in a similar manner to Lava Mountain, except this time the FOFs aren't zero-height so it's a slightly different situation?
See merge request !160
TD rendering freeze fix
This is a fix for the Lava Mountain freeze issue from TD (KartKrew/TD#13) which can also occur in vanilla SRB2 as it turns out. Basically the issue occurs whenever an FOF with a single-patch texture with holes goes off the bottom of the screen far enough.
See merge request !159
This fixes the grid floors in TD's Lava Mountain freezing the game if they go off the bottom of the screen far enough (they have ACWRFL1A as the wall texture, which is a single patch texture with holes)
Better papercollision
Diagonal bounding boxes are no longer root 2 larger than they should be. Testwad is <root>/toaster/sawb.wad. Nice and simple.
See merge request !49
Slopewall transfer
As @Nev3r wants. Go along a slope, hit a wall? LAUNCH! Well, I mean. He wants it slightly less weak. I have already made it less weak than P_SlopeLaunch.
Also also I made the trail that goes behind the player when they're rolling take into account vertical momentum as well as horizontal, so that being launched directly up didn't leave you trailless.
Test with <root>/!LatestSRB2Files/srb2win_branch_transfer.exe and <root>/Nev3r/ACZMaster.wad (roll down slope directly in front of you).
See merge request !66
Hardcode some stuff in patch.dta
Does what it says on the tin. I wanted to do the Christmas objects before creating the merge request, but it's advisable to block patch.dta's updating as little as possible, and I'm slowing down on my own development speed, so better move quickly.
Also, I hardcoded a nicer rolling trail aura from smiles.wad/smilespatch.wad, a nicer fire from new CEZ1, made the Koopa shell more fun and made the spinning flame jet WAY less hacky.
Check <root>/!LatestSRB2Files/ for srb2win_branch_hardcode.exe and the patch.dta fork it runs off, which includes all the necessary changes here.
See merge request !65
Revamps of several dated linedef type effects
Felt like being productive so made some things I hate suck less.
Linedef type 7 (flat alignment) now works as follows.
* Linedef angle (from v1 to v2) is flat angle.
* Origin of flat is manipulated to match v1's coordinates - unless ML_NOKNUX is flagged, in which case uses frontside x and y offsets as flat offsets instead.
* ML_NOSONIC prevents changing floor.
* ML_NOTAILS prevents changing ceiling.
* Both of the above flags at once prints a warning.
* (THZ and probably a few other maps need updating.)
Linedef type 540 (friction) now works as follows.
* Controlled by x offset instead of length - offset of -100 is maximum iciness, offset of +483(!!!) is the maximum sludginess BUT things are scaled such that +100 is about the maximum sludginess any reasonable human being would want in a level, 0 is ORIG_FRICTION)
* Not reliant on a sector special to function (can be applied solely by tag to in-map sectors or solid FOF control sectors)
* Uses less memory, perform less calculations, and not bug out objects which just happen to use movefactor for something
* PHYSICS CHANGE: Low friction surfaces actively impede your acceleration (and make your animation speeds faster to give off that Looney Tunes out-of-control effect)
* (ACZ and Frozen Hillside needs updating.)
Sector types 1 and 3 in section 3 no longer do anything.
Linedef type 3 (zoom tube) now works as follows.
* Abs of frontside x offset is speed in units of FRACUNIT/8.
* Abs of frontside y offset is waypoint sequence number.
* Effect 4 flag rotates the player to match the waypoint direction (same as before).
* (ERZ needs updating.)
Linedef type 11 (rope hang) now works as follows.
* Abs of frontside x offset is speed in units of FRACUNIT/8.
* Abs of frontside y offset is waypoint sequence number.
* Effect 1 flag makes rope transfer one-way. (same as before)
* No climb flag makes rope static. (same as before)
* (ACZ and maybe ERZ need updating.)
Linedef type 258 (laser) is almost the same as before, but has altered functionality.
* Its flashing is less obnoxious. (56.25% to 68.75% instead of 100% to 0%, at half the speed)
Linedef type 14 (Bustable block parameters) is new, and works as follows.
* Tagged to the control sector of a block that is likely to be busted (via executor or collision, doesn't matter)
* Concatenation of frontside textures is MT_ object type to spawn, defaults to MT_ROCKCRUMBLE1 if not present
* Sound played when being busted is object type's activesound
* Frontside x offset is spacing (in fracunits) of spawned particles, defaults to 32<<FRACBITS
* Frontside y offset is the fuse of spawned particles in tics, defaults to 3*TICRATE, if set to -1 fuse is not set
* Effect 1 flag makes particles "fly out" horizontally and vertically from the center of the FOF
Sector types 7 through 15 in section 3 no longer do anything.
Linedef type 250 (Mario Block) is almost the same as before, but has new functionality and is slightly different in another way.
* No Climb flag turns it into a brick block (set on Custom FOF via presence of FF_SHATTERBOTTOM - busts when hit from the bottom, player hits their head/fist/whatever, no more upwards momentum)
* Effect 1 flag makes it an invisible block (set on Custom FOF via absence of (FF_SOLID|FF_RENDERALL|FF_CUTLEVEL) - intangible from every side except the bottom. Becomes visible and tangible when it's hit once)
* Only updates side textures when moving down or stationary, not whilst moving up - more fidelity to the source material, less processing on the CPU, everyone wins.
* If FOF master linedef has a backside, then: [If there's items in it the FOF's flats are set to that of the backside sector's ceiling, otherwise the floor.] Otherwise, no flat change.
Linedef type 4 (Speed Pad parameters) now works as follows.
* Frontside x offset is speed in fracunits.
* Effect 4 flag doesn't center the player. (same as before)
* Effect 5 flag sends them off in rolling frames.
* Frontside upper texture is sound to play on launch, defaults to sfx_spdpad when not given
Sector type 6 in section 3 no longer does anything.
Object type 757 is changed as follows, and no longer works on its own - see Linedef type 15 for more details.
* Tag via its angle field
* Number of objects to spawn per tic around it via its z field, if zero then just spawn at center
* Is flipped if given MTF_OBJECTFLIP.
* (ERZ and Seraphic Skylands - if we use that map - needs updating)
Linedef type 15 (Fan particle spawner parameters) is new, and works as follows.
* Tag is tag of object(s!)
* Object type set via concatenation of frontside textures, MT_PARTICLE is default
* The length of the linedef is the radius the particle is spawned out (zeroed if z field is 0)
* Frontside x offset is speed upwards
* Frontside y offset is number of degrees to turn each tic (zeroed if z field is 0)
* Frontside floor and ceiling heights are the heights in which the particle is bound through some fun mathematics
A_ParticleSpawn is changed, too.
* Object type is now changed through actor->threshold instead of var1 to support Linedef type 15.
Test executable uploaded at /toaster/srb2win_branch_flatalignment.exe on the ftp.
Test file uploaded at /toaster/flatalignment.wad on the ftp.
Breaks compatibility with 2.1 so put in internal.
See merge request !29
Plane displacement
Basic support for plane displacement, no netplay support as of writing but this is what Nev3r wanted moreorless at least.
Linedef types 66-68 are the plane displacement specials; 66 = move floor only, 67 = move ceiling only, 68 = both
Front sector = control sector
Tag = tag of target sectors to be moved whenever the control sector floor moves
Linedef length = movement factor relative to control sector movement, 256 = 1:1 with control sector. 128 is half as much, 512 is twice as much, etc.
Whenever the control sector floor moves (not ceiling, never ceiling), the selected planes of the tagged sectors all move (mind, they have a tic delay due to how it all works, it's not perfect really). No support for reverse speeds yet sorry.
EDIT: oh, btw, test exe and test map are included in my folder on the FTP (srb2win-plane-displacement.exe and plane-disp-test.wad, respectively)
See merge request !61
