58 lines
3.3 KiB
C
58 lines
3.3 KiB
C
// COMMON SETTINGS
|
|
// ----------------------------------------------------------------------------------------------
|
|
// These settings are used in both SW UART, HW UART and SPI mode
|
|
// ----------------------------------------------------------------------------------------------
|
|
#define BUFSIZE 128 // Size of the read buffer for incoming data
|
|
#define VERBOSE_MODE true // If set to 'true' enables debug output
|
|
#define BLE_READPACKET_TIMEOUT 5 // Timeout in ms waiting to read a response
|
|
|
|
|
|
// SOFTWARE UART SETTINGS
|
|
// ----------------------------------------------------------------------------------------------
|
|
// The following macros declare the pins that will be used for 'SW' serial.
|
|
// You should use this option if you are connecting the UART Friend to an UNO
|
|
// ----------------------------------------------------------------------------------------------
|
|
//#define BLUEFRUIT_SWUART_RXD_PIN 9 // Required for software serial!
|
|
//#define BLUEFRUIT_SWUART_TXD_PIN 10 // Required for software serial!
|
|
//#define BLUEFRUIT_UART_CTS_PIN -1//11 // Required for software serial!
|
|
//#define BLUEFRUIT_UART_RTS_PIN -1 // Optional, set to -1 if unused
|
|
|
|
|
|
// HARDWARE UART SETTINGS
|
|
// ----------------------------------------------------------------------------------------------
|
|
// The following macros declare the HW serial port you are using. Uncomment
|
|
// this line if you are connecting the BLE to Leonardo/Micro or Flora
|
|
// ----------------------------------------------------------------------------------------------
|
|
//#ifdef Serial1 // this makes it not complain on compilation if there's no Serial1
|
|
#define BLUEFRUIT_HWSERIAL_NAME Serial1
|
|
//#endif
|
|
|
|
|
|
// SHARED UART SETTINGS
|
|
// ----------------------------------------------------------------------------------------------
|
|
// The following sets the optional Mode pin, its recommended but not required
|
|
// ----------------------------------------------------------------------------------------------
|
|
#define BLUEFRUIT_UART_MODE_PIN -1//12 // Set to -1 if unused
|
|
|
|
|
|
// SHARED SPI SETTINGS
|
|
// ----------------------------------------------------------------------------------------------
|
|
// The following macros declare the pins to use for HW and SW SPI communication.
|
|
// SCK, MISO and MOSI should be connected to the HW SPI pins on the Uno when
|
|
// using HW SPI. This should be used with nRF51822 based Bluefruit LE modules
|
|
// that use SPI (Bluefruit LE SPI Friend).
|
|
// ----------------------------------------------------------------------------------------------
|
|
#define BLUEFRUIT_SPI_CS 8
|
|
#define BLUEFRUIT_SPI_IRQ 7
|
|
#define BLUEFRUIT_SPI_RST 4 // Optional but recommended, set to -1 if unused
|
|
|
|
// SOFTWARE SPI SETTINGS
|
|
// ----------------------------------------------------------------------------------------------
|
|
// The following macros declare the pins to use for SW SPI communication.
|
|
// This should be used with nRF51822 based Bluefruit LE modules that use SPI
|
|
// (Bluefruit LE SPI Friend).
|
|
// ----------------------------------------------------------------------------------------------
|
|
#define BLUEFRUIT_SPI_SCK 13
|
|
#define BLUEFRUIT_SPI_MISO 12
|
|
#define BLUEFRUIT_SPI_MOSI 11
|