diff --git a/src/doomdef.h b/src/doomdef.h index f9828a442..a91142e9d 100644 --- a/src/doomdef.h +++ b/src/doomdef.h @@ -578,9 +578,6 @@ extern const char *compdate, *comptime, *comprevision, *compbranch; /// Dumps the contents of a network save game upon consistency failure for debugging. //#define DUMPCONSISTENCY -/// Polyobject fake flat code -#define POLYOBJECTS_PLANES - /// See name of player in your crosshair #define SEENAMES diff --git a/src/hardware/hw_bsp.c b/src/hardware/hw_bsp.c index 6f3dd9fbd..ebb74f653 100644 --- a/src/hardware/hw_bsp.c +++ b/src/hardware/hw_bsp.c @@ -887,12 +887,10 @@ static void AdjustSegs(void) float distv1,distv2,tmp; nearv1 = nearv2 = MYMAX; -#ifdef POLYOBJECTS // Don't touch polyobject segs. We'll compensate // for this when we go about drawing them. if (lseg->polyseg) continue; -#endif if (p) { for (j = 0; j < p->numpts; j++) diff --git a/src/hardware/hw_main.c b/src/hardware/hw_main.c index 7fca7cd91..50c76fb5a 100644 --- a/src/hardware/hw_main.c +++ b/src/hardware/hw_main.c @@ -1602,7 +1602,6 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) // heights of the polygon, and h & l, are the final (clipped) // poly coords. -#ifdef POLYOBJECTS // NOTE: With polyobjects, whenever you need to check the properties of the polyobject sector it belongs to, // you must use the linedef's backsector to be correct // From CB @@ -1612,7 +1611,6 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) popenbottom = back->floorheight; } else -#endif { popentop = min(worldtop, worldhigh); popenbottom = max(worldbottom, worldlow); @@ -1642,7 +1640,6 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) polybottom = polytop - textureheight[gr_midtexture]*repeats; } // CB -#ifdef POLYOBJECTS // NOTE: With polyobjects, whenever you need to check the properties of the polyobject sector it belongs to, // you must use the linedef's backsector to be correct if (gr_curline->polyseg) @@ -1650,7 +1647,6 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) lowcut = polybottom; highcut = polytop; } -#endif else { // The cut-off values of a linedef can always be constant, since every line has an absoulute front and or back sector @@ -1780,7 +1776,6 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) break; } -#ifdef POLYOBJECTS if (gr_curline->polyseg && gr_curline->polyseg->translucency > 0) { if (gr_curline->polyseg->translucency >= NUMTRANSMAPS) // wall not drawn @@ -1791,7 +1786,6 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) else blendmode = HWR_TranstableToAlpha(gr_curline->polyseg->translucency, &Surf); } -#endif if (gr_frontsector->numlights) { @@ -2587,10 +2581,8 @@ static void HWR_AddLine(seg_t * line) static sector_t tempsec; fixed_t v1x, v1y, v2x, v2y; // the seg's vertexes as fixed_t -#ifdef POLYOBJECTS if (line->polyseg && !(line->polyseg->flags & POF_RENDERSIDES)) return; -#endif gr_curline = line; @@ -2717,13 +2709,10 @@ static void HWR_AddLine(seg_t * line) if (bothceilingssky && bothfloorssky) // everything's sky? let's save us a bit of time then { - if ( -#ifdef POLYOBJECTS - !line->polyseg && -#endif - !line->sidedef->midtexture - && ((!gr_frontsector->ffloors && !gr_backsector->ffloors) - || (gr_frontsector->tag == gr_backsector->tag))) + if (!line->polyseg && + !line->sidedef->midtexture + && ((!gr_frontsector->ffloors && !gr_backsector->ffloors) + || (gr_frontsector->tag == gr_backsector->tag))) return; // line is empty, don't even bother // treat like wide open window instead HWR_ProcessSeg(); // Doesn't need arguments because they're defined globally :D @@ -2759,13 +2748,10 @@ static void HWR_AddLine(seg_t * line) if (bothceilingssky && bothfloorssky) // everything's sky? let's save us a bit of time then { - if ( -#ifdef POLYOBJECTS - !line->polyseg && -#endif - !line->sidedef->midtexture - && ((!gr_frontsector->ffloors && !gr_backsector->ffloors) - || (gr_frontsector->tag == gr_backsector->tag))) + if (!line->polyseg && + !line->sidedef->midtexture + && ((!gr_frontsector->ffloors && !gr_backsector->ffloors) + || (gr_frontsector->tag == gr_backsector->tag))) return; // line is empty, don't even bother goto clippass; // treat like wide open window instead @@ -2957,8 +2943,6 @@ static boolean HWR_CheckBBox(fixed_t *bspcoord) #endif } -#ifdef POLYOBJECTS - // // HWR_AddPolyObjectSegs // @@ -3001,7 +2985,6 @@ static inline void HWR_AddPolyObjectSegs(void) Z_Free(gr_fakeline); } -#ifdef POLYOBJECTS_PLANES static void HWR_RenderPolyObjectPlane(polyobj_t *polysector, boolean isceiling, fixed_t fixedheight, FBITFIELD blendmode, UINT8 lightlevel, levelflat_t *levelflat, sector_t *FOFsector, UINT8 alpha, extracolormap_t *planecolormap) @@ -3256,8 +3239,6 @@ static void HWR_AddPolyObjectPlanes(void) } } } -#endif -#endif // -----------------+ // HWR_Subsector : Determine floor/ceiling planes. @@ -3585,7 +3566,6 @@ static void HWR_Subsector(size_t num) #endif #endif //doplanes -#ifdef POLYOBJECTS // Draw all the polyobjects in this subsector if (sub->polyList) { @@ -3606,15 +3586,12 @@ static void HWR_Subsector(size_t num) // Draw polyobject lines. HWR_AddPolyObjectSegs(); -#ifdef POLYOBJECTS_PLANES if (sub->validcount != validcount) // This validcount situation seems to let us know that the floors have already been drawn. { // Draw polyobject planes HWR_AddPolyObjectPlanes(); } -#endif } -#endif // Hurder ici se passe les choses INT32�essantes! // on vient de tracer le sol et le plafond @@ -3637,14 +3614,8 @@ static void HWR_Subsector(size_t num) while (count--) { - if (!line->glseg -#ifdef POLYOBJECTS - && !line->polyseg // ignore segs that belong to polyobjects -#endif - ) - { + if (!line->glseg && !line->polyseg) // ignore segs that belong to polyobjects HWR_AddLine(line); - } line++; } } diff --git a/src/lua_blockmaplib.c b/src/lua_blockmaplib.c index bc8d20e8e..5aae73284 100644 --- a/src/lua_blockmaplib.c +++ b/src/lua_blockmaplib.c @@ -80,9 +80,7 @@ static UINT8 lib_searchBlockmap_Lines(lua_State *L, INT32 x, INT32 y, mobj_t *th { INT32 offset; const INT32 *list; // Big blockmap -#ifdef POLYOBJECTS polymaplink_t *plink; // haleyjd 02/22/06 -#endif line_t *ld; if (x < 0 || y < 0 || x >= bmapwidth || y >= bmapheight) @@ -90,7 +88,6 @@ static UINT8 lib_searchBlockmap_Lines(lua_State *L, INT32 x, INT32 y, mobj_t *th offset = y*bmapwidth + x; -#ifdef POLYOBJECTS // haleyjd 02/22/06: consider polyobject lines plink = polyblocklinks[offset]; @@ -133,7 +130,6 @@ static UINT8 lib_searchBlockmap_Lines(lua_State *L, INT32 x, INT32 y, mobj_t *th } plink = (polymaplink_t *)(plink->link.next); } -#endif offset = *(blockmap + offset); // offset = blockmap[y*bmapwidth+x]; diff --git a/src/p_map.c b/src/p_map.c index 0c21e3e69..0fade4847 100644 --- a/src/p_map.c +++ b/src/p_map.c @@ -2157,7 +2157,6 @@ boolean P_CheckPosition(mobj_t *thing, fixed_t x, fixed_t y) BMBOUNDFIX(xl, xh, yl, yh); -#ifdef POLYOBJECTS // Check polyobjects and see if tmfloorz/tmceilingz need to be altered { validcount++; @@ -2229,7 +2228,6 @@ boolean P_CheckPosition(mobj_t *thing, fixed_t x, fixed_t y) } } } -#endif // tmfloorthing is set when tmfloorz comes from a thing's top tmfloorthing = NULL; @@ -2387,7 +2385,6 @@ boolean P_CheckCameraPosition(fixed_t x, fixed_t y, camera_t *thiscam) BMBOUNDFIX(xl, xh, yl, yh); -#ifdef POLYOBJECTS // Check polyobjects and see if tmfloorz/tmceilingz need to be altered { validcount++; @@ -2458,7 +2455,6 @@ boolean P_CheckCameraPosition(fixed_t x, fixed_t y, camera_t *thiscam) } } } -#endif // check lines for (bx = xl; bx <= xh; bx++) diff --git a/src/p_maputl.c b/src/p_maputl.c index bfca72eda..b0289db36 100644 --- a/src/p_maputl.c +++ b/src/p_maputl.c @@ -451,7 +451,6 @@ void P_LineOpening(line_t *linedef, mobj_t *mobj) I_Assert(back != NULL); openfloorrover = openceilingrover = NULL; -#ifdef POLYOBJECTS if (linedef->polyobj) { // set these defaults so that polyobjects don't interfere with collision above or below them @@ -462,7 +461,6 @@ void P_LineOpening(line_t *linedef, mobj_t *mobj) opentopslope = openbottomslope = NULL; } else -#endif { // Set open and high/low values here fixed_t frontheight, backheight; @@ -517,7 +515,7 @@ void P_LineOpening(line_t *linedef, mobj_t *mobj) texheight = textures[texnum]->height << FRACBITS; // Set texbottom and textop to the Z coordinates of the texture's boundaries -#if 0 // #ifdef POLYOBJECTS +#if 0 // don't remove this code unless solid midtextures // on non-solid polyobjects should NEVER happen in the future if (linedef->polyobj && (linedef->polyobj->flags & POF_TESTHEIGHT)) { @@ -560,7 +558,6 @@ void P_LineOpening(line_t *linedef, mobj_t *mobj) } } } -#ifdef POLYOBJECTS if (linedef->polyobj) { // Treat polyobj's backsector like a 3D Floor @@ -597,94 +594,95 @@ void P_LineOpening(line_t *linedef, mobj_t *mobj) // otherwise don't do anything special, pretend there's nothing else there } else -#endif - // Check for fake floors in the sector. - if (front->ffloors || back->ffloors) { - ffloor_t *rover; - fixed_t delta1, delta2; - - // Check for frontsector's fake floors - for (rover = front->ffloors; rover; rover = rover->next) + // Check for fake floors in the sector. + if (front->ffloors || back->ffloors) { - fixed_t topheight, bottomheight; - if (!(rover->flags & FF_EXISTS)) - continue; + ffloor_t *rover; + fixed_t delta1, delta2; - if (mobj->player && (P_CheckSolidLava(rover) || P_CanRunOnWater(mobj->player, rover))) - ; - else if (!((rover->flags & FF_BLOCKPLAYER && mobj->player) - || (rover->flags & FF_BLOCKOTHERS && !mobj->player))) - continue; - - topheight = P_GetFOFTopZ(mobj, front, rover, tmx, tmy, linedef); - bottomheight = P_GetFOFBottomZ(mobj, front, rover, tmx, tmy, linedef); - - delta1 = abs(mobj->z - (bottomheight + ((topheight - bottomheight)/2))); - delta2 = abs(thingtop - (bottomheight + ((topheight - bottomheight)/2))); - - if (delta1 >= delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_PLATFORM) // thing is below FOF + // Check for frontsector's fake floors + for (rover = front->ffloors; rover; rover = rover->next) { - if (bottomheight < opentop) { - opentop = bottomheight; - opentopslope = *rover->b_slope; - openceilingrover = rover; + fixed_t topheight, bottomheight; + if (!(rover->flags & FF_EXISTS)) + continue; + + if (mobj->player && (P_CheckSolidLava(rover) || P_CanRunOnWater(mobj->player, rover))) + ; + else if (!((rover->flags & FF_BLOCKPLAYER && mobj->player) + || (rover->flags & FF_BLOCKOTHERS && !mobj->player))) + continue; + + topheight = P_GetFOFTopZ(mobj, front, rover, tmx, tmy, linedef); + bottomheight = P_GetFOFBottomZ(mobj, front, rover, tmx, tmy, linedef); + + delta1 = abs(mobj->z - (bottomheight + ((topheight - bottomheight)/2))); + delta2 = abs(thingtop - (bottomheight + ((topheight - bottomheight)/2))); + + if (delta1 >= delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_PLATFORM) // thing is below FOF + { + if (bottomheight < opentop) { + opentop = bottomheight; + opentopslope = *rover->b_slope; + openceilingrover = rover; + } + else if (bottomheight < highceiling) + highceiling = bottomheight; + } + + if (delta1 < delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_REVERSEPLATFORM) // thing is above FOF + { + if (topheight > openbottom) { + openbottom = topheight; + openbottomslope = *rover->t_slope; + openfloorrover = rover; + } + else if (topheight > lowfloor) + lowfloor = topheight; } - else if (bottomheight < highceiling) - highceiling = bottomheight; } - if (delta1 < delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_REVERSEPLATFORM) // thing is above FOF + // Check for backsectors fake floors + for (rover = back->ffloors; rover; rover = rover->next) { - if (topheight > openbottom) { - openbottom = topheight; - openbottomslope = *rover->t_slope; - openfloorrover = rover; + fixed_t topheight, bottomheight; + if (!(rover->flags & FF_EXISTS)) + continue; + + if (mobj->player && (P_CheckSolidLava(rover) || P_CanRunOnWater(mobj->player, rover))) + ; + else if (!((rover->flags & FF_BLOCKPLAYER && mobj->player) + || (rover->flags & FF_BLOCKOTHERS && !mobj->player))) + continue; + + topheight = P_GetFOFTopZ(mobj, back, rover, tmx, tmy, linedef); + bottomheight = P_GetFOFBottomZ(mobj, back, rover, tmx, tmy, linedef); + + delta1 = abs(mobj->z - (bottomheight + ((topheight - bottomheight)/2))); + delta2 = abs(thingtop - (bottomheight + ((topheight - bottomheight)/2))); + + if (delta1 >= delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_PLATFORM) // thing is below FOF + { + if (bottomheight < opentop) { + opentop = bottomheight; + opentopslope = *rover->b_slope; + openceilingrover = rover; + } + else if (bottomheight < highceiling) + highceiling = bottomheight; } - else if (topheight > lowfloor) - lowfloor = topheight; - } - } - // Check for backsectors fake floors - for (rover = back->ffloors; rover; rover = rover->next) - { - fixed_t topheight, bottomheight; - if (!(rover->flags & FF_EXISTS)) - continue; - - if (mobj->player && (P_CheckSolidLava(rover) || P_CanRunOnWater(mobj->player, rover))) - ; - else if (!((rover->flags & FF_BLOCKPLAYER && mobj->player) - || (rover->flags & FF_BLOCKOTHERS && !mobj->player))) - continue; - - topheight = P_GetFOFTopZ(mobj, back, rover, tmx, tmy, linedef); - bottomheight = P_GetFOFBottomZ(mobj, back, rover, tmx, tmy, linedef); - - delta1 = abs(mobj->z - (bottomheight + ((topheight - bottomheight)/2))); - delta2 = abs(thingtop - (bottomheight + ((topheight - bottomheight)/2))); - - if (delta1 >= delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_PLATFORM) // thing is below FOF - { - if (bottomheight < opentop) { - opentop = bottomheight; - opentopslope = *rover->b_slope; - openceilingrover = rover; + if (delta1 < delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_REVERSEPLATFORM) // thing is above FOF + { + if (topheight > openbottom) { + openbottom = topheight; + openbottomslope = *rover->t_slope; + openfloorrover = rover; + } + else if (topheight > lowfloor) + lowfloor = topheight; } - else if (bottomheight < highceiling) - highceiling = bottomheight; - } - - if (delta1 < delta2 && (rover->flags & FF_INTANGIBLEFLATS) != FF_REVERSEPLATFORM) // thing is above FOF - { - if (topheight > openbottom) { - openbottom = topheight; - openbottomslope = *rover->t_slope; - openfloorrover = rover; - } - else if (topheight > lowfloor) - lowfloor = topheight; } } } @@ -934,9 +932,7 @@ boolean P_BlockLinesIterator(INT32 x, INT32 y, boolean (*func)(line_t *)) { INT32 offset; const INT32 *list; // Big blockmap -#ifdef POLYOBJECTS polymaplink_t *plink; // haleyjd 02/22/06 -#endif line_t *ld; if (x < 0 || y < 0 || x >= bmapwidth || y >= bmapheight) @@ -944,7 +940,6 @@ boolean P_BlockLinesIterator(INT32 x, INT32 y, boolean (*func)(line_t *)) offset = y*bmapwidth + x; -#ifdef POLYOBJECTS // haleyjd 02/22/06: consider polyobject lines plink = polyblocklinks[offset]; @@ -968,7 +963,6 @@ boolean P_BlockLinesIterator(INT32 x, INT32 y, boolean (*func)(line_t *)) } plink = (polymaplink_t *)(plink->link.next); } -#endif offset = *(blockmap + offset); // offset = blockmap[y*bmapwidth+x]; diff --git a/src/p_mobj.c b/src/p_mobj.c index 29fe1a57c..c78ec4a53 100644 --- a/src/p_mobj.c +++ b/src/p_mobj.c @@ -2895,7 +2895,6 @@ static void P_PlayerZMovement(mobj_t *mo) mo->eflags |= MFE_JUSTHITFLOOR; // Spin Attack { -#ifdef POLYOBJECTS // Check if we're on a polyobject // that triggers a linedef executor. msecnode_t *node; @@ -2955,8 +2954,6 @@ static void P_PlayerZMovement(mobj_t *mo) } if (!stopmovecut) -#endif - // Cut momentum in half when you hit the ground and // aren't pressing any controls. if (!(mo->player->cmd.forwardmove || mo->player->cmd.sidemove) && !mo->player->cmomx && !mo->player->cmomy && !(mo->player->pflags & PF_SPINNING)) diff --git a/src/p_polyobj.c b/src/p_polyobj.c index 7e1ff1f49..0431707ac 100644 --- a/src/p_polyobj.c +++ b/src/p_polyobj.c @@ -28,12 +28,6 @@ #include "r_state.h" #include "r_defs.h" - -#define POLYOBJECTS - - -#ifdef POLYOBJECTS - /* Theory behind Polyobjects: @@ -3152,6 +3146,4 @@ INT32 EV_DoPolyObjFade(polyfadedata_t *pfdata) return 1; } -#endif // ifdef POLYOBJECTS - // EOF diff --git a/src/p_polyobj.h b/src/p_polyobj.h index d56701d2d..7dfc90ce9 100644 --- a/src/p_polyobj.h +++ b/src/p_polyobj.h @@ -18,8 +18,6 @@ #include "p_mobj.h" #include "r_defs.h" -// haleyjd: temporary define -#ifdef POLYOBJECTS // // Defines // @@ -353,8 +351,6 @@ extern polyobj_t *PolyObjects; extern INT32 numPolyObjects; extern polymaplink_t **polyblocklinks; // polyobject blockmap -#endif // ifdef POLYOBJECTS - #endif // EOF diff --git a/src/p_saveg.c b/src/p_saveg.c index e8c6593fa..34bd3724b 100644 --- a/src/p_saveg.c +++ b/src/p_saveg.c @@ -1300,7 +1300,6 @@ typedef enum tc_planedisplace, tc_dynslopeline, tc_dynslopevert, -#ifdef POLYOBJECTS tc_polyrotate, // haleyjd 03/26/06: polyobjects tc_polymove, tc_polywaypoint, @@ -1310,7 +1309,6 @@ typedef enum tc_polydisplace, tc_polyrotdisplace, tc_polyfade, -#endif tc_end } specials_e; @@ -1991,7 +1989,6 @@ static inline void SaveDynamicSlopeThinker(const thinker_t *th, const UINT8 type WRITEMEM(save_p, ht->vex, sizeof(ht->vex)); } -#ifdef POLYOBJECTS static inline void SavePolyrotatetThinker(const thinker_t *th, const UINT8 type) { const polyrotate_t *ht = (const void *)th; @@ -2100,7 +2097,6 @@ static void SavePolyfadeThinker(const thinker_t *th, const UINT8 type) WRITEINT32(save_p, ht->duration); WRITEINT32(save_p, ht->timer); } -#endif static void P_NetArchiveThinkers(void) { @@ -2272,7 +2268,6 @@ static void P_NetArchiveThinkers(void) SavePlaneDisplaceThinker(th, tc_planedisplace); continue; } -#ifdef POLYOBJECTS else if (th->function.acp1 == (actionf_p1)T_PolyObjRotate) { SavePolyrotatetThinker(th, tc_polyrotate); @@ -2318,7 +2313,6 @@ static void P_NetArchiveThinkers(void) SavePolyfadeThinker(th, tc_polyfade); continue; } -#endif else if (th->function.acp1 == (actionf_p1)T_DynamicSlopeLine) { SaveDynamicSlopeThinker(th, tc_dynslopeline); @@ -3138,7 +3132,6 @@ static inline thinker_t* LoadDynamicSlopeThinker(actionf_p1 thinker) return &ht->thinker; } -#ifdef POLYOBJECTS static inline thinker_t* LoadPolyrotatetThinker(actionf_p1 thinker) { polyrotate_t *ht = Z_Malloc(sizeof (*ht), PU_LEVSPEC, NULL); @@ -3255,7 +3248,6 @@ static thinker_t* LoadPolyfadeThinker(actionf_p1 thinker) ht->timer = READINT32(save_p); return &ht->thinker; } -#endif static void P_NetUnArchiveThinkers(void) { @@ -3416,7 +3408,6 @@ static void P_NetUnArchiveThinkers(void) case tc_planedisplace: th = LoadPlaneDisplaceThinker((actionf_p1)T_PlaneDisplace); break; -#ifdef POLYOBJECTS case tc_polyrotate: th = LoadPolyrotatetThinker((actionf_p1)T_PolyObjRotate); break; @@ -3453,7 +3444,6 @@ static void P_NetUnArchiveThinkers(void) case tc_polyfade: th = LoadPolyfadeThinker((actionf_p1)T_PolyObjFade); break; -#endif case tc_dynslopeline: th = LoadDynamicSlopeThinker((actionf_p1)T_DynamicSlopeLine); @@ -3515,7 +3505,6 @@ static void P_NetUnArchiveThinkers(void) // // haleyjd 03/26/06: PolyObject saving code // -#ifdef POLYOBJECTS #define PD_FLAGS 0x01 #define PD_TRANS 0x02 @@ -3604,7 +3593,6 @@ static inline void P_UnArchivePolyObjects(void) for (i = 0; i < numSavedPolys; ++i) P_UnArchivePolyObj(&PolyObjects[i]); } -#endif static inline void P_FinishMobjs(void) { @@ -4078,9 +4066,7 @@ void P_SaveNetGame(void) if (gamestate == GS_LEVEL) { P_NetArchiveWorld(); -#ifdef POLYOBJECTS P_ArchivePolyObjects(); -#endif P_NetArchiveThinkers(); P_NetArchiveSpecials(); P_NetArchiveColormaps(); @@ -4118,9 +4104,7 @@ boolean P_LoadNetGame(void) if (gamestate == GS_LEVEL) { P_NetUnArchiveWorld(); -#ifdef POLYOBJECTS P_UnArchivePolyObjects(); -#endif P_NetUnArchiveThinkers(); P_NetUnArchiveSpecials(); P_NetUnArchiveColormaps(); diff --git a/src/p_setup.c b/src/p_setup.c index 8c73b85e6..b3b618e51 100644 --- a/src/p_setup.c +++ b/src/p_setup.c @@ -953,9 +953,7 @@ static void P_InitializeLinedef(line_t *ld) ld->splats = NULL; #endif ld->firsttag = ld->nexttag = -1; -#ifdef POLYOBJECTS ld->polyobj = NULL; -#endif ld->text = NULL; ld->callcount = 0; @@ -1869,10 +1867,8 @@ static void P_InitializeSeg(seg_t *seg) seg->numlights = 0; seg->rlights = NULL; -#ifdef POLYOBJECTS seg->polyseg = NULL; seg->dontrenderme = false; -#endif } static void P_LoadSegs(UINT8 *data) @@ -2235,11 +2231,9 @@ static boolean P_LoadBlockMap(UINT8 *data, size_t count) blocklinks = Z_Calloc(count, PU_LEVEL, NULL); blockmap = blockmaplump+4; -#ifdef POLYOBJECTS // haleyjd 2/22/06: setup polyobject blockmap count = sizeof(*polyblocklinks) * bmapwidth * bmapheight; polyblocklinks = Z_Calloc(count, PU_LEVEL, NULL); -#endif return true; } @@ -2490,11 +2484,9 @@ static void P_CreateBlockMap(void) blocklinks = Z_Calloc(count, PU_LEVEL, NULL); blockmap = blockmaplump + 4; -#ifdef POLYOBJECTS // haleyjd 2/22/06: setup polyobject blockmap count = sizeof(*polyblocklinks) * bmapwidth * bmapheight; polyblocklinks = Z_Calloc(count, PU_LEVEL, NULL); -#endif } } diff --git a/src/p_sight.c b/src/p_sight.c index 3d1ee9e60..3e44281d0 100644 --- a/src/p_sight.c +++ b/src/p_sight.c @@ -100,7 +100,6 @@ static fixed_t P_InterceptVector2(divline_t *v2, divline_t *v1) return frac; } -#ifdef POLYOBJECTS static boolean P_CrossSubsecPolyObj(polyobj_t *po, register los_t *los) { size_t i; @@ -169,7 +168,6 @@ static boolean P_CrossSubsecPolyObj(polyobj_t *po, register los_t *los) return true; } -#endif // // P_CrossSubsector @@ -180,9 +178,7 @@ static boolean P_CrossSubsector(size_t num, register los_t *los) { seg_t *seg; INT32 count; -#ifdef POLYOBJECTS polyobj_t *po; // haleyjd 02/23/06 -#endif #ifdef RANGECHECK if (num >= numsubsectors) @@ -192,7 +188,6 @@ static boolean P_CrossSubsector(size_t num, register los_t *los) // haleyjd 02/23/06: this assignment should be after the above check seg = segs + subsectors[num].firstline; -#ifdef POLYOBJECTS // haleyjd 02/23/06: check polyobject lines if ((po = subsectors[num].polyList)) { @@ -207,7 +202,6 @@ static boolean P_CrossSubsector(size_t num, register los_t *los) po = (polyobj_t *)(po->link.next); } } -#endif for (count = subsectors[num].numlines; --count >= 0; seg++) // check lines { @@ -413,15 +407,10 @@ boolean P_CheckSight(mobj_t *t1, mobj_t *t2) // killough 11/98: shortcut for melee situations // same subsector? obviously visible -#ifndef POLYOBJECTS - if (t1->subsector == t2->subsector) - return true; -#else // haleyjd 02/23/06: can't do this if there are polyobjects in the subsec if (!t1->subsector->polyList && t1->subsector == t2->subsector) return true; -#endif // An unobstructed LOS is possible. // Now look from eyes of t1 to any part of t2. diff --git a/src/p_spec.c b/src/p_spec.c index cebab0902..c93846438 100644 --- a/src/p_spec.c +++ b/src/p_spec.c @@ -1076,9 +1076,6 @@ INT32 P_FindSpecialLineFromTag(INT16 special, INT16 tag, INT32 start) } } -// haleyjd: temporary define -#ifdef POLYOBJECTS - // // PolyDoor // @@ -1401,8 +1398,6 @@ static boolean PolyRotDisplace(line_t *line) return EV_DoPolyObjRotDisplace(&pdd); } -#endif // ifdef POLYOBJECTS - /** Changes a sector's tag. * Used by the linedef executor tag changer and by crumblers. * @@ -4010,7 +4005,6 @@ static void P_ProcessLineSpecial(line_t *line, mobj_t *mo, sector_t *callsec) } break; -#ifdef POLYOBJECTS case 480: // Polyobj_DoorSlide case 481: // Polyobj_DoorSwing PolyDoor(line); @@ -4040,7 +4034,6 @@ static void P_ProcessLineSpecial(line_t *line, mobj_t *mo, sector_t *callsec) case 492: PolyFade(line); break; -#endif default: break; @@ -7281,7 +7274,6 @@ void P_SpawnSpecials(boolean fromnetsave) Z_Free(secthinkers); -#ifdef POLYOBJECTS // haleyjd 02/20/06: spawn polyobjects Polyobj_InitLevel(); @@ -7302,7 +7294,6 @@ void P_SpawnSpecials(boolean fromnetsave) break; } } -#endif P_RunLevelLoadExecutors(); } diff --git a/src/p_user.c b/src/p_user.c index b2f40fe70..36a1054c6 100644 --- a/src/p_user.c +++ b/src/p_user.c @@ -3847,7 +3847,6 @@ static void P_DoTeeter(player_t *player) BMBOUNDFIX(xl, xh, yl, yh); // Polyobjects -#ifdef POLYOBJECTS validcount++; for (by = yl; by <= yh; by++) @@ -3941,7 +3940,6 @@ static void P_DoTeeter(player_t *player) plink = (polymaplink_t *)(plink->link.next); } } -#endif if (teeter) // only bother with objects as a last resort if you were already teetering { mobj_t *oldtmthing = tmthing; @@ -5702,11 +5700,7 @@ static void P_2dMovement(player_t *player) } else if (player->onconveyor == 4 && !P_IsObjectOnGround(player->mo)) // Actual conveyor belt player->cmomx = player->cmomy = 0; - else if (player->onconveyor != 2 && player->onconveyor != 4 -#ifdef POLYOBJECTS - && player->onconveyor != 1 -#endif - ) + else if (player->onconveyor != 2 && player->onconveyor != 4 && player->onconveyor != 1) player->cmomx = player->cmomy = 0; player->rmomx = player->mo->momx - player->cmomx; @@ -5901,11 +5895,7 @@ static void P_3dMovement(player_t *player) } else if (player->onconveyor == 4 && !P_IsObjectOnGround(player->mo)) // Actual conveyor belt player->cmomx = player->cmomy = 0; - else if (player->onconveyor != 2 && player->onconveyor != 4 -#ifdef POLYOBJECTS - && player->onconveyor != 1 -#endif - ) + else if (player->onconveyor != 2 && player->onconveyor != 4 && player->onconveyor != 1) player->cmomx = player->cmomy = 0; player->rmomx = player->mo->momx - player->cmomx; @@ -10235,7 +10225,6 @@ boolean P_MoveChaseCamera(player_t *player, camera_t *thiscam, boolean resetcall } } -#ifdef POLYOBJECTS // Check polyobjects and see if floorz/ceilingz need to be altered { INT32 xl, xh, yl, yh, bx, by; @@ -10314,7 +10303,6 @@ boolean P_MoveChaseCamera(player_t *player, camera_t *thiscam, boolean resetcall } } } -#endif // crushed camera if (myceilingz <= myfloorz + thiscam->height && !resetcalled && !cameranoclip) @@ -11725,10 +11713,8 @@ void P_PlayerThink(player_t *player) P_MobjCheckWater(player->mo); #ifndef SECTORSPECIALSAFTERTHINK -#ifdef POLYOBJECTS if (player->onconveyor != 1 || !P_IsObjectOnGround(player->mo)) -#endif - player->onconveyor = 0; + player->onconveyor = 0; // check special sectors : damage & secrets if (!player->spectator) @@ -12086,12 +12072,10 @@ void P_PlayerThink(player_t *player) // it lasts for one tic. player->pflags &= ~PF_FULLSTASIS; -#ifdef POLYOBJECTS if (player->onconveyor == 1) player->onconveyor = 3; else if (player->onconveyor == 3) player->cmomy = player->cmomx = 0; -#endif P_DoSuperStuff(player); P_CheckSneakerAndLivesTimer(player); @@ -12424,10 +12408,8 @@ void P_PlayerAfterThink(player_t *player) cmd = &player->cmd; #ifdef SECTORSPECIALSAFTERTHINK -#ifdef POLYOBJECTS if (player->onconveyor != 1 || !P_IsObjectOnGround(player->mo)) -#endif - player->onconveyor = 0; + player->onconveyor = 0; // check special sectors : damage & secrets if (!player->spectator) diff --git a/src/r_bsp.c b/src/r_bsp.c index 77ab2a82f..3bd023dbf 100644 --- a/src/r_bsp.c +++ b/src/r_bsp.c @@ -354,9 +354,7 @@ sector_t *R_FakeFlat(sector_t *sec, sector_t *tempsec, INT32 *floorlightlevel, boolean R_IsEmptyLine(seg_t *line, sector_t *front, sector_t *back) { return ( -#ifdef POLYOBJECTS !line->polyseg && -#endif back->ceilingpic == front->ceilingpic && back->floorpic == front->floorpic && back->f_slope == front->f_slope @@ -482,13 +480,10 @@ static void R_AddLine(seg_t *line) if (bothceilingssky && bothfloorssky) // everything's sky? let's save us a bit of time then { - if ( -#ifdef POLYOBJECTS - !line->polyseg && -#endif - !line->sidedef->midtexture - && ((!frontsector->ffloors && !backsector->ffloors) - || (frontsector->tag == backsector->tag))) + if (!line->polyseg && + !line->sidedef->midtexture + && ((!frontsector->ffloors && !backsector->ffloors) + || (frontsector->tag == backsector->tag))) return; // line is empty, don't even bother goto clippass; // treat like wide open window instead @@ -654,8 +649,6 @@ static boolean R_CheckBBox(const fixed_t *bspcoord) return true; } -#ifdef POLYOBJECTS - size_t numpolys; // number of polyobjects in current subsector size_t num_po_ptrs; // number of polyobject pointers allocated polyobj_t **po_ptrs; // temp ptr array to sort polyobject pointers @@ -819,7 +812,6 @@ static void R_AddPolyObjects(subsector_t *sub) R_AddLine(po_ptrs[i]->segs[j]); } } -#endif // // R_Subsector @@ -896,11 +888,7 @@ static void R_Subsector(size_t num) || (frontsector->heightsec != -1 && sectors[frontsector->heightsec].ceilingpic == skyflatnum)) { floorplane = R_FindPlane(frontsector->floorheight, frontsector->floorpic, floorlightlevel, - frontsector->floor_xoffs, frontsector->floor_yoffs, frontsector->floorpic_angle, floorcolormap, NULL -#ifdef POLYOBJECTS_PLANES - , NULL -#endif - , frontsector->f_slope); + frontsector->floor_xoffs, frontsector->floor_yoffs, frontsector->floorpic_angle, floorcolormap, NULL, NULL, frontsector->f_slope); } else floorplane = NULL; @@ -911,11 +899,7 @@ static void R_Subsector(size_t num) { ceilingplane = R_FindPlane(frontsector->ceilingheight, frontsector->ceilingpic, ceilinglightlevel, frontsector->ceiling_xoffs, frontsector->ceiling_yoffs, frontsector->ceilingpic_angle, - ceilingcolormap, NULL -#ifdef POLYOBJECTS_PLANES - , NULL -#endif - , frontsector->c_slope); + ceilingcolormap, NULL, NULL, frontsector->c_slope); } else ceilingplane = NULL; @@ -963,11 +947,7 @@ static void R_Subsector(size_t num) ffloor[numffloors].plane = R_FindPlane(*rover->bottomheight, *rover->bottompic, *frontsector->lightlist[light].lightlevel, *rover->bottomxoffs, - *rover->bottomyoffs, *rover->bottomangle, *frontsector->lightlist[light].extra_colormap, rover -#ifdef POLYOBJECTS_PLANES - , NULL -#endif - , *rover->b_slope); + *rover->bottomyoffs, *rover->bottomangle, *frontsector->lightlist[light].extra_colormap, rover, NULL, *rover->b_slope); ffloor[numffloors].slope = *rover->b_slope; @@ -1000,11 +980,7 @@ static void R_Subsector(size_t num) ffloor[numffloors].plane = R_FindPlane(*rover->topheight, *rover->toppic, *frontsector->lightlist[light].lightlevel, *rover->topxoffs, *rover->topyoffs, *rover->topangle, - *frontsector->lightlist[light].extra_colormap, rover -#ifdef POLYOBJECTS_PLANES - , NULL -#endif - , *rover->t_slope); + *frontsector->lightlist[light].extra_colormap, rover, NULL, *rover->t_slope); ffloor[numffloors].slope = *rover->t_slope; @@ -1019,7 +995,6 @@ static void R_Subsector(size_t num) } } -#ifdef POLYOBJECTS_PLANES // Polyobjects have planes, too! if (sub->polyList) { @@ -1085,7 +1060,6 @@ static void R_Subsector(size_t num) po = (polyobj_t *)(po->link.next); } } -#endif #ifdef FLOORSPLATS if (sub->splats) @@ -1108,21 +1082,15 @@ static void R_Subsector(size_t num) firstseg = NULL; -#ifdef POLYOBJECTS // haleyjd 02/19/06: draw polyobjects before static lines if (sub->polyList) R_AddPolyObjects(sub); -#endif while (count--) { // CONS_Debug(DBG_GAMELOGIC, "Adding normal line %d...(%d)\n", line->linedef-lines, leveltime); - if (!line->glseg -#ifdef POLYOBJECTS - && !line->polyseg // ignore segs that belong to polyobjects -#endif - ) - R_AddLine(line); + if (!line->glseg && !line->polyseg) // ignore segs that belong to polyobjects + R_AddLine(line); line++; curline = NULL; /* cph 2001/11/18 - must clear curline now we're done with it, so stuff doesn't try using it for other things */ } diff --git a/src/r_bsp.h b/src/r_bsp.h index 1562b79f6..e2da8ebaf 100644 --- a/src/r_bsp.h +++ b/src/r_bsp.h @@ -40,13 +40,11 @@ void R_PortalClearClipSegs(INT32 start, INT32 end); void R_ClearDrawSegs(void); void R_RenderBSPNode(INT32 bspnum); -#ifdef POLYOBJECTS void R_SortPolyObjects(subsector_t *sub); extern size_t numpolys; // number of polyobjects in current subsector extern size_t num_po_ptrs; // number of polyobject pointers allocated extern polyobj_t **po_ptrs; // temp ptr array to sort polyobject pointers -#endif sector_t *R_FakeFlat(sector_t *sec, sector_t *tempsec, INT32 *floorlightlevel, INT32 *ceilinglightlevel, boolean back); diff --git a/src/r_defs.h b/src/r_defs.h index 4a8f5be34..a36568192 100644 --- a/src/r_defs.h +++ b/src/r_defs.h @@ -28,8 +28,6 @@ #include "m_aatree.h" #endif -#define POLYOBJECTS - // // ClipWallSegment // Clips the given range of columns @@ -107,9 +105,7 @@ typedef struct fixed_t z; ///< Z coordinate. } degenmobj_t; -#ifdef POLYOBJECTS #include "p_polyobj.h" -#endif // Store fake planes in a resizable array insted of just by // heightsec. Allows for multiple fake planes. @@ -434,9 +430,7 @@ typedef struct line_s void *splats; // wallsplat_t list #endif INT32 firsttag, nexttag; // improves searches for tags. -#ifdef POLYOBJECTS polyobj_t *polyobj; // Belongs to a polyobject? -#endif char *text; // a concatenation of all front and back texture names, for linedef specials that require a string. INT16 callcount; // no. of calls left before triggering, for the "X calls" linedef specials, defaults to 0 @@ -479,9 +473,7 @@ typedef struct subsector_s sector_t *sector; INT16 numlines; UINT16 firstline; -#ifdef POLYOBJECTS struct polyobj_s *polyList; // haleyjd 02/19/06: list of polyobjects -#endif #if 1//#ifdef FLOORSPLATS void *splats; // floorsplat_t list #endif @@ -584,10 +576,8 @@ typedef struct seg_s // Why slow things down by calculating lightlists for every thick side? size_t numlights; r_lightlist_t *rlights; -#ifdef POLYOBJECTS polyobj_t *polyseg; boolean dontrenderme; -#endif boolean glseg; } seg_t; diff --git a/src/r_plane.c b/src/r_plane.c index ca5aa758e..9b5a94340 100644 --- a/src/r_plane.c +++ b/src/r_plane.c @@ -337,11 +337,7 @@ static visplane_t *new_visplane(unsigned hash) // visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, fixed_t xoff, fixed_t yoff, angle_t plangle, extracolormap_t *planecolormap, - ffloor_t *pfloor -#ifdef POLYOBJECTS_PLANES - , polyobj_t *polyobj -#endif - , pslope_t *slope) + ffloor_t *pfloor, polyobj_t *polyobj, pslope_t *slope) { visplane_t *check; unsigned hash; @@ -361,7 +357,6 @@ visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, } } -#ifdef POLYOBJECTS_PLANES if (polyobj) { if (polyobj->angle != 0) @@ -376,7 +371,6 @@ visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, yoff += polyobj->centerPt.y; } } -#endif // This appears to fix the Nimbus Ruins sky bug. if (picnum == skyflatnum && pfloor) @@ -390,12 +384,10 @@ visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, for (check = visplanes[hash]; check; check = check->next) { -#ifdef POLYOBJECTS_PLANES if (check->polyobj && pfloor) continue; if (polyobj != check->polyobj) continue; -#endif if (height == check->height && picnum == check->picnum && lightlevel == check->lightlevel && xoff == check->xoffs && yoff == check->yoffs @@ -426,9 +418,7 @@ visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, check->viewz = viewz; check->viewangle = viewangle; check->plangle = plangle; -#ifdef POLYOBJECTS_PLANES check->polyobj = polyobj; -#endif check->slope = slope; memset(check->top, 0xff, sizeof (check->top)); @@ -496,9 +486,7 @@ visplane_t *R_CheckPlane(visplane_t *pl, INT32 start, INT32 stop) new_pl->viewz = pl->viewz; new_pl->viewangle = pl->viewangle; new_pl->plangle = pl->plangle; -#ifdef POLYOBJECTS_PLANES new_pl->polyobj = pl->polyobj; -#endif new_pl->slope = pl->slope; pl = new_pl; pl->minx = start; @@ -523,11 +511,9 @@ void R_ExpandPlane(visplane_t *pl, INT32 start, INT32 stop) // INT32 unionl, unionh; // INT32 x; -#ifdef POLYOBJECTS_PLANES // Don't expand polyobject planes here - we do that on our own. if (pl->polyobj) return; -#endif if (pl->minx > start) pl->minx = start; if (pl->maxx < stop) pl->maxx = stop; @@ -603,11 +589,7 @@ void R_DrawPlanes(void) { for (pl = visplanes[i]; pl; pl = pl->next) { - if (pl->ffloor != NULL -#ifdef POLYOBJECTS_PLANES - || pl->polyobj != NULL -#endif - ) + if (pl->ffloor != NULL || pl->polyobj != NULL) continue; R_DrawSinglePlane(pl); @@ -961,7 +943,6 @@ void R_DrawSinglePlane(visplane_t *pl) #endif spanfunc = spanfuncs[BASEDRAWFUNC]; -#ifdef POLYOBJECTS_PLANES if (pl->polyobj && pl->polyobj->translucency != 0) { spanfunctype = SPANDRAWFUNC_TRANS; @@ -979,95 +960,98 @@ void R_DrawSinglePlane(visplane_t *pl) else light = LIGHTLEVELS-1; - } else -#endif - if (pl->ffloor) + } + else { - // Don't draw planes that shouldn't be drawn. - for (rover = pl->ffloor->target->ffloors; rover; rover = rover->next) + if (pl->ffloor) { - if ((pl->ffloor->flags & FF_CUTEXTRA) && (rover->flags & FF_EXTRA)) + // Don't draw planes that shouldn't be drawn. + for (rover = pl->ffloor->target->ffloors; rover; rover = rover->next) { - if (pl->ffloor->flags & FF_EXTRA) + if ((pl->ffloor->flags & FF_CUTEXTRA) && (rover->flags & FF_EXTRA)) { - // The plane is from an extra 3D floor... Check the flags so - // there are no undesired cuts. - if (((pl->ffloor->flags & (FF_FOG|FF_SWIMMABLE)) == (rover->flags & (FF_FOG|FF_SWIMMABLE))) - && pl->height < *rover->topheight - && pl->height > *rover->bottomheight) - return; + if (pl->ffloor->flags & FF_EXTRA) + { + // The plane is from an extra 3D floor... Check the flags so + // there are no undesired cuts. + if (((pl->ffloor->flags & (FF_FOG|FF_SWIMMABLE)) == (rover->flags & (FF_FOG|FF_SWIMMABLE))) + && pl->height < *rover->topheight + && pl->height > *rover->bottomheight) + return; + } } } - } - if (pl->ffloor->flags & FF_TRANSLUCENT) - { - spanfunctype = SPANDRAWFUNC_TRANS; - - // Hacked up support for alpha value in software mode Tails 09-24-2002 - if (pl->ffloor->alpha < 12) - return; // Don't even draw it - else if (pl->ffloor->alpha < 38) - ds_transmap = transtables + ((tr_trans90-1)<ffloor->alpha < 64) - ds_transmap = transtables + ((tr_trans80-1)<ffloor->alpha < 89) - ds_transmap = transtables + ((tr_trans70-1)<ffloor->alpha < 115) - ds_transmap = transtables + ((tr_trans60-1)<ffloor->alpha < 140) - ds_transmap = transtables + ((tr_trans50-1)<ffloor->alpha < 166) - ds_transmap = transtables + ((tr_trans40-1)<ffloor->alpha < 192) - ds_transmap = transtables + ((tr_trans30-1)<ffloor->alpha < 217) - ds_transmap = transtables + ((tr_trans20-1)<ffloor->alpha < 243) - ds_transmap = transtables + ((tr_trans10-1)<extra_colormap && (pl->extra_colormap->flags & CMF_FOG))) - light = (pl->lightlevel >> LIGHTSEGSHIFT); - else - light = LIGHTLEVELS-1; - } - else if (pl->ffloor->flags & FF_FOG) - { - spanfunctype = SPANDRAWFUNC_FOG; - light = (pl->lightlevel >> LIGHTSEGSHIFT); - } - else light = (pl->lightlevel >> LIGHTSEGSHIFT); - -#ifndef NOWATER - if (pl->ffloor->flags & FF_RIPPLE) - { - INT32 top, bottom; - - itswater = true; - if (spanfunctype == SPANDRAWFUNC_TRANS) + if (pl->ffloor->flags & FF_TRANSLUCENT) { - spanfunctype = SPANDRAWFUNC_WATER; + spanfunctype = SPANDRAWFUNC_TRANS; - // Copy the current scene, ugh - top = pl->high-8; - bottom = pl->low+8; + // Hacked up support for alpha value in software mode Tails 09-24-2002 + if (pl->ffloor->alpha < 12) + return; // Don't even draw it + else if (pl->ffloor->alpha < 38) + ds_transmap = transtables + ((tr_trans90-1)<ffloor->alpha < 64) + ds_transmap = transtables + ((tr_trans80-1)<ffloor->alpha < 89) + ds_transmap = transtables + ((tr_trans70-1)<ffloor->alpha < 115) + ds_transmap = transtables + ((tr_trans60-1)<ffloor->alpha < 140) + ds_transmap = transtables + ((tr_trans50-1)<ffloor->alpha < 166) + ds_transmap = transtables + ((tr_trans40-1)<ffloor->alpha < 192) + ds_transmap = transtables + ((tr_trans30-1)<ffloor->alpha < 217) + ds_transmap = transtables + ((tr_trans20-1)<ffloor->alpha < 243) + ds_transmap = transtables + ((tr_trans10-1)< vid.height) - bottom = vid.height; - - // Only copy the part of the screen we need - VID_BlitLinearScreen((splitscreen && viewplayer == &players[secondarydisplayplayer]) ? screens[0] + (top+(vid.height>>1))*vid.width : screens[0]+((top)*vid.width), screens[1]+((top)*vid.width), - vid.width, bottom-top, - vid.width, vid.width); + if ((spanfunctype == SPANDRAWFUNC_SPLAT) || (pl->extra_colormap && (pl->extra_colormap->flags & CMF_FOG))) + light = (pl->lightlevel >> LIGHTSEGSHIFT); + else + light = LIGHTLEVELS-1; } + else if (pl->ffloor->flags & FF_FOG) + { + spanfunctype = SPANDRAWFUNC_FOG; + light = (pl->lightlevel >> LIGHTSEGSHIFT); + } + else light = (pl->lightlevel >> LIGHTSEGSHIFT); + + #ifndef NOWATER + if (pl->ffloor->flags & FF_RIPPLE) + { + INT32 top, bottom; + + itswater = true; + if (spanfunctype == SPANDRAWFUNC_TRANS) + { + spanfunctype = SPANDRAWFUNC_WATER; + + // Copy the current scene, ugh + top = pl->high-8; + bottom = pl->low+8; + + if (top < 0) + top = 0; + if (bottom > vid.height) + bottom = vid.height; + + // Only copy the part of the screen we need + VID_BlitLinearScreen((splitscreen && viewplayer == &players[secondarydisplayplayer]) ? screens[0] + (top+(vid.height>>1))*vid.width : screens[0]+((top)*vid.width), screens[1]+((top)*vid.width), + vid.width, bottom-top, + vid.width, vid.width); + } + } + #endif } -#endif + else + light = (pl->lightlevel >> LIGHTSEGSHIFT); } - else light = (pl->lightlevel >> LIGHTSEGSHIFT); if (!pl->slope // Don't mess with angle on slopes! We'll handle this ourselves later && viewangle != pl->viewangle+pl->plangle) diff --git a/src/r_plane.h b/src/r_plane.h index a1a5b7a78..67fa19f38 100644 --- a/src/r_plane.h +++ b/src/r_plane.h @@ -47,9 +47,7 @@ typedef struct visplane_s fixed_t xoffs, yoffs; // Scrolling flats. struct ffloor_s *ffloor; -#ifdef POLYOBJECTS_PLANES polyobj_t *polyobj; -#endif pslope_t *slope; } visplane_t; @@ -80,11 +78,7 @@ void R_MapPlane(INT32 y, INT32 x1, INT32 x2); void R_MakeSpans(INT32 x, INT32 t1, INT32 b1, INT32 t2, INT32 b2); void R_DrawPlanes(void); visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, fixed_t xoff, fixed_t yoff, angle_t plangle, - extracolormap_t *planecolormap, ffloor_t *ffloor -#ifdef POLYOBJECTS_PLANES - , polyobj_t *polyobj -#endif - , pslope_t *slope); + extracolormap_t *planecolormap, ffloor_t *ffloor, polyobj_t *polyobj, pslope_t *slope); visplane_t *R_CheckPlane(visplane_t *pl, INT32 start, INT32 stop); void R_ExpandPlane(visplane_t *pl, INT32 start, INT32 stop); void R_PlaneBounds(visplane_t *plane); @@ -112,9 +106,7 @@ typedef struct planemgr_s struct pslope_s *slope; struct ffloor_s *ffloor; -#ifdef POLYOBJECTS_PLANES polyobj_t *polyobj; -#endif } visffloor_t; extern visffloor_t ffloor[MAXFFLOORS]; diff --git a/src/r_segs.c b/src/r_segs.c index b6b4ca44c..6a838be79 100644 --- a/src/r_segs.c +++ b/src/r_segs.c @@ -610,7 +610,6 @@ void R_RenderMaskedSegRange(drawseg_t *ds, INT32 x1, INT32 x2) // draw the texture col = (column_t *)((UINT8 *)R_GetColumn(texnum, maskedtexturecol[dc_x]) - 3); -//#ifdef POLYOBJECTS_PLANES #if 0 // Disabling this allows inside edges to render below the planes, for until the clipping is fixed to work right when POs are near the camera. -Red if (curline->dontrenderme && curline->polyseg && (curline->polyseg->flags & POF_RENDERPLANES)) { @@ -1309,10 +1308,8 @@ static void R_RenderSegLoop (void) for (i = 0; i < numffloors; i++) { -#ifdef POLYOBJECTS_PLANES if (ffloor[i].polyobj && (!curline->polyseg || ffloor[i].polyobj != curline->polyseg)) continue; -#endif if (ffloor[i].height < viewz) { @@ -1325,18 +1322,19 @@ static void R_RenderSegLoop (void) if (bottom_w > bottom) bottom_w = bottom; -#ifdef POLYOBJECTS_PLANES // Polyobject-specific hack to fix plane leaking -Red - if (ffloor[i].polyobj && top_w >= bottom_w) { + if (ffloor[i].polyobj && top_w >= bottom_w) + { ffloor[i].plane->top[rw_x] = 0xFFFF; ffloor[i].plane->bottom[rw_x] = 0x0000; // fix for sky plane drawing crashes - Monster Iestyn 25/05/18 - } else -#endif - - if (top_w <= bottom_w) + } + else { - ffloor[i].plane->top[rw_x] = (INT16)top_w; - ffloor[i].plane->bottom[rw_x] = (INT16)bottom_w; + if (top_w <= bottom_w) + { + ffloor[i].plane->top[rw_x] = (INT16)top_w; + ffloor[i].plane->bottom[rw_x] = (INT16)bottom_w; + } } } else if (ffloor[i].height > viewz) @@ -1350,18 +1348,19 @@ static void R_RenderSegLoop (void) if (bottom_w > bottom) bottom_w = bottom; -#ifdef POLYOBJECTS_PLANES // Polyobject-specific hack to fix plane leaking -Red - if (ffloor[i].polyobj && top_w >= bottom_w) { + if (ffloor[i].polyobj && top_w >= bottom_w) + { ffloor[i].plane->top[rw_x] = 0xFFFF; ffloor[i].plane->bottom[rw_x] = 0x0000; // fix for sky plane drawing crashes - Monster Iestyn 25/05/18 - } else -#endif - - if (top_w <= bottom_w) + } + else { - ffloor[i].plane->top[rw_x] = (INT16)top_w; - ffloor[i].plane->bottom[rw_x] = (INT16)bottom_w; + if (top_w <= bottom_w) + { + ffloor[i].plane->top[rw_x] = (INT16)top_w; + ffloor[i].plane->bottom[rw_x] = (INT16)bottom_w; + } } } } @@ -1818,10 +1817,8 @@ void R_StoreWallRange(INT32 start, INT32 stop) { for (i = 0; i < numffloors; i++) { -#ifdef POLYOBJECTS_PLANES if (ffloor[i].polyobj && (!ds_p->curline->polyseg || ffloor[i].polyobj != ds_p->curline->polyseg)) continue; -#endif if (ffloor[i].slope) { ffloor[i].f_pos = P_GetZAt(ffloor[i].slope, segleft.x, segleft.y) - viewz; @@ -2328,33 +2325,40 @@ void R_StoreWallRange(INT32 start, INT32 stop) maskedtextureheight = ds_p->maskedtextureheight; // note to red, this == &(ds_p->maskedtextureheight[0]) -#ifdef POLYOBJECTS - if (curline->polyseg) { // use REAL front and back floors please, so midtexture rendering isn't mucked up + if (curline->polyseg) + { // use REAL front and back floors please, so midtexture rendering isn't mucked up rw_midtextureslide = rw_midtexturebackslide = 0; if (!!(linedef->flags & ML_DONTPEGBOTTOM) ^ !!(linedef->flags & ML_EFFECT3)) rw_midtexturemid = rw_midtextureback = max(curline->frontsector->floorheight, curline->backsector->floorheight) - viewz; else rw_midtexturemid = rw_midtextureback = min(curline->frontsector->ceilingheight, curline->backsector->ceilingheight) - viewz; - } else -#endif - // Set midtexture starting height - if (linedef->flags & ML_EFFECT2) { // Ignore slopes when texturing - rw_midtextureslide = rw_midtexturebackslide = 0; - if (!!(linedef->flags & ML_DONTPEGBOTTOM) ^ !!(linedef->flags & ML_EFFECT3)) - rw_midtexturemid = rw_midtextureback = max(frontsector->floorheight, backsector->floorheight) - viewz; - else - rw_midtexturemid = rw_midtextureback = min(frontsector->ceilingheight, backsector->ceilingheight) - viewz; + } + else + { + // Set midtexture starting height + if (linedef->flags & ML_EFFECT2) + { // Ignore slopes when texturing + rw_midtextureslide = rw_midtexturebackslide = 0; + if (!!(linedef->flags & ML_DONTPEGBOTTOM) ^ !!(linedef->flags & ML_EFFECT3)) + rw_midtexturemid = rw_midtextureback = max(frontsector->floorheight, backsector->floorheight) - viewz; + else + rw_midtexturemid = rw_midtextureback = min(frontsector->ceilingheight, backsector->ceilingheight) - viewz; - } else if (!!(linedef->flags & ML_DONTPEGBOTTOM) ^ !!(linedef->flags & ML_EFFECT3)) { - rw_midtexturemid = worldbottom; - rw_midtextureslide = floorfrontslide; - rw_midtextureback = worldlow; - rw_midtexturebackslide = floorbackslide; - } else { - rw_midtexturemid = worldtop; - rw_midtextureslide = ceilingfrontslide; - rw_midtextureback = worldhigh; - rw_midtexturebackslide = ceilingbackslide; + } + else if (!!(linedef->flags & ML_DONTPEGBOTTOM) ^ !!(linedef->flags & ML_EFFECT3)) + { + rw_midtexturemid = worldbottom; + rw_midtextureslide = floorfrontslide; + rw_midtextureback = worldlow; + rw_midtexturebackslide = floorbackslide; + } + else + { + rw_midtexturemid = worldtop; + rw_midtextureslide = ceilingfrontslide; + rw_midtextureback = worldhigh; + rw_midtexturebackslide = ceilingbackslide; + } } rw_midtexturemid += sidedef->rowoffset; rw_midtextureback += sidedef->rowoffset; @@ -2711,7 +2715,6 @@ void R_StoreWallRange(INT32 start, INT32 stop) } } } -#ifdef POLYOBJECTS_PLANES if (curline->polyseg && frontsector && (curline->polyseg->flags & POF_RENDERPLANES)) { while (i < numffloors && ffloor[i].polyobj != curline->polyseg) i++; @@ -2750,7 +2753,6 @@ void R_StoreWallRange(INT32 start, INT32 stop) i++; } } -#endif numbackffloors = i; } @@ -2804,7 +2806,6 @@ void R_StoreWallRange(INT32 start, INT32 stop) for (i = 0; i < numffloors; i++) R_ExpandPlane(ffloor[i].plane, rw_x, rw_stopx - 1); } -#ifdef POLYOBJECTS_PLANES // FIXME hack to fix planes disappearing when a seg goes behind the camera. This NEEDS to be changed to be done properly. -Red if (curline->polyseg) { @@ -2819,7 +2820,6 @@ void R_StoreWallRange(INT32 start, INT32 stop) ffloor[i].plane->maxx = rw_stopx - 1; } } -#endif } #ifdef WALLSPLATS diff --git a/src/r_things.c b/src/r_things.c index b4ffd4408..361cb1961 100644 --- a/src/r_things.c +++ b/src/r_things.c @@ -1140,7 +1140,6 @@ fixed_t R_GetShadowZ(mobj_t *thing, pslope_t **shadowslope) } #if 0 // Unfortunately, this drops CEZ2 down to sub-17 FPS on my i7. -//#ifdef POLYOBJECTS // Check polyobjects and see if floorz needs to be altered, for rings only because they don't update floorz if (thing->type == MT_RING) { @@ -2271,7 +2270,6 @@ static void R_CreateDrawNodes(maskcount_t* mask, drawnode_t* head, boolean temps entry->ffloor = ds->thicksides[i]; } } -#ifdef POLYOBJECTS_PLANES // Check for a polyobject plane, but only if this is a front line if (ds->curline->polyseg && ds->curline->polyseg->visplane && !ds->curline->side) { plane = ds->curline->polyseg->visplane; @@ -2287,7 +2285,6 @@ static void R_CreateDrawNodes(maskcount_t* mask, drawnode_t* head, boolean temps } ds->curline->polyseg->visplane = NULL; } -#endif if (ds->maskedtexturecol) { entry = R_CreateDrawNode(head); @@ -2335,7 +2332,6 @@ static void R_CreateDrawNodes(maskcount_t* mask, drawnode_t* head, boolean temps if (tempskip) return; -#ifdef POLYOBJECTS_PLANES // find all the remaining polyobject planes and add them on the end of the list // probably this is a terrible idea if we wanted them to be sorted properly // but it works getting them in for now @@ -2356,7 +2352,6 @@ static void R_CreateDrawNodes(maskcount_t* mask, drawnode_t* head, boolean temps // note: no seg is set, for what should be obvious reasons PolyObjects[i].visplane = NULL; } -#endif // No vissprites in this mask? if (mask->vissprites[1] - mask->vissprites[0] == 0)